How To Update Samsung Using USB Cable

[gsm_khalil]

How To Update Samsung S5222 Star 3 Duos Firmware Using USB Cable And FlashTool
Firmware Update Steps: - Turn your Samsung S5222 off, And take its battery, SIM cards, And MMC card out. - From the flasher folder run FlashTool_E2 exe - To Select the Firmware files from its extracted folder click on (...) button,You have to do so for each file. - The selecting of firmware files must be in the below order:

- S5222xxxxx_psi.fls
- S5222xxxxx_slb.fls
- S5222xxxxx_bin.fls
- S5222xxxxx_cds.fls
- S5222xxxxxx.dffs

- Now Check these settings:

Custom Order (Must be checked).
Erases Calibration! : Select (Erase whole flash before download).
Baud Rate: 921600
Communication Driver: Infineon USB Driver.

- Now you can click on Next button, And a new window will appear. - Click on Start USB1 button. - Now you have to connect your Samsung S5222 to PC using the USB cable. - There are more than one way to connect your phone, You can try any one of the following:

1- With the phone's battery in, Press and hold Home key then connect the USB cable to it. 2- With the phone's battery in, Press and hold Volume Down + Volume Up keys, Then connect the USB cable to it. 3- Connect the USB cable to phone without battery, After it is detected you can insert the battery.

- After the FlashTool starts the update process you have to wait for some minutes. - When the operation is done, You will see a Success word, And that means it was done right. - Disconnect the USB cable from phone. - With your Samsung Star 3 Duos on

FlashTool_E2:::::::Hotfile.com: One click file hosting: C3750_C3650_FlashTool_E2_XMM2150.rar
firmware::: S5222 Star 3 Duos
- S5222XXLAF / XELAE Russia
- S5222XELC3 Russia
- S5222XELL1 Russia

[gsm_khalil]

How To Update Samsung T999 Galaxy S3 Firmware By Using Odin Flasher

Turn off your GS3 T999, Take its battery, SIM card, And MMC card out.
- Run Odin.exe
- By default the Auto Reboot and F.Reset Time are checked, So keep them checked.
- Open the extracted firmware folder and you will see one big file inside it:

For T999: T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar.md5
For T999v: KIES_HOME_T999VVLDLL1_T999VYVLDLL1_CL616748_REV04_ user_low_ship.tar.md5

- The files we mentioned are only as example, You can use any version you want.
- Now click on PDA button at Odin's window and select the above firmware file.
- Put the battery into your phone, But do not turn it on.
- To put your GS3 T999 into download mode follow these steps:

Press and Hold Volume Down key, Then press Power key until you get the warning message on your phone's screen.
- Release both keys and press Volume Up key to be in Download Mod



Firmware t999:::
T999UVDLJA / TMBDLJA USA T-Mobile





Firmware t999v:::
T999VVLDLL1 / YVLDLL1 GLW Canada Wind Mobile
- T999VVLDLL1 / YVLDLL1 MCT Canada Mobilicity

- T999VVLDLL1 / YVLDLL1 VTR Canada Videotro