Go Back   GsmAsha > GSM Mobile Brands -Software Hardware Area- > Chinese Models & Cloned Phones > Chinese Phone Software Repair Area

Closed Thread
 
Thread Tools Search this Thread
Old 30-06-2011   #1
GSM- CHITTAGONG
Super V.I.P
 
GSM- CHITTAGONG's Avatar
 
Join Date: Dec 2010
Location: www.Gsm-ctg.com
Age: 33
Posts: 530
Sonork:
Mobile:
Status:Offline
Thanks: 119
Thanked 345 Times in 164 Posts
Rep Power: 11
GSM- CHITTAGONG is on a distinguished road
Send a message via Yahoo to GSM- CHITTAGONG
Default How To Make China Phone Flash Cable See here

Many of new member face the problem, how they make a usb to com cable for flash his china phone. with this usb to com cable any one can use free soft for do software operation on his phone.

with a usb to com cable (as like ringtone cable) you can make your own cable for flashing, format, ect for china phone.

i explain here with a Motorola c261 usb ringtone cable, its always do better work for me.

first collect a cable of Motorola c261 usb ringtone cable (available in market) like this-








in cable middle have intact a box by plastic. in it have a mini pcb. need to open this
mini box for see and work on it. see picture-









after open it, now we see a mini pcb, its one side have 5 cable, which is connect to pc usb, no need to touch it. its ok.



we work on pcb opposite cable connection, here have 3 cable. 1 tx, 1rx, 1gnd. see pic-








Here have 3 cable, now make a connection for V+ or B+. when we flashing our phone we need power supply for flash phone. so connect a cable with clip in this point, just use a diod from pc usb V+, see picture-






For cable driver, use it motorola usb to com cable drive or you can use PL2303 USB driver.

connect cable tx rx gnd B+ to phone tx rx gnd B+ and work your phone. now we found our won cable for flashing china phone.

for expert user : now you can collect a RJ45 connector. than join tx rx gnd in in RJ45 Socket. now you use any rj45 cable with it. and place it on any box, as like in any reject device, open box and leave it old pcb than place this pcb in it. and V+/B+ cable and clip stay in out or side for give power supply to phone. now you found a complete china box/device and use it.
 
The Following User Says Thank You to GSM- CHITTAGONG For This Useful Post:
Closed Thread

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
China Nokia F59 Tv Mobile Phone ON/OFF Way Solution Make This ...::GSM420::... Chinese Phone Hardware Repair Area 0 19-02-2011 01:54 PM
i-phone 32GB china phone lock remove by spiderman!!! renson19_06 SpiderMan 0 16-02-2011 02:31 PM
china full flash to usb cable 100% tested.... BAPPYMOBILEPARK Chinese Phone Software Repair Area 9 12-02-2011 07:37 PM
china any dual SIM mobile phone imei change without any box only with data cable test ...::GSM420::... Chinese Phone Software Repair Area 3 17-01-2011 01:11 PM
Flash China Phone By HWK Likhon-Mahmud Chinese Phone Software Repair Area 0 29-12-2010 05:39 PM


All times are GMT +6. The time now is 12:13 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright GsmAsha 2009 - 2020. All Rights Reserved.